G430 G-450 ACF removal fluid is a high-tech product produced in Korea. This product can perform a good expansion separation on the heated and hardened ACF glue.
Ingredients: Chlorine solvent, alcohol solvent, Ester solvent, organic acid, nonionic surfactant stabilizer.
- tranquilizer
Traits: specific gravity: 1.125, ignition point: no, boiling point 45 degrees C, ignition point: 470 degrees C
-Advance
PH: 5~6 (1%). Appearance: colorless, transparent liquid. Steam density: 2.9 (air = 1)
Instructions:
*Use concentration: use the stock solution at room temperature.
Emergency measures: If the skin is inadvertently contacted, please wash it with water immediately. If you have eyes, wash it with water and go to the hospital for treatment.
*How to use and precautions
1. Local ventilation should be used in the place of use.
2, use protective gloves and other protective equipment when using
3. When opening the ACF removal bottle, the internal GAS may appear suddenly (especially in summer), so the cover should be opened slowly. Please use the ACF removal solution in the designated container.
4. Use a disposable chopstick to cut the shovel shape and apply the ACF removal solution on the ATB to remove the old ACF. Wait for about 20 seconds. After it dissolves and swells, use a cotton swab and sprinkle. Until the old ACF on the TAB is wiped clean.
5, low temperature and light preservation
Blue Glue
product description:
The strippable protective glue (also known as Tafi glue) for LCM. Compared with traditional silica gel, our products have good fluidity, good adhesion, thin film thickness (0.06-0.25mm) and short surface drying time (3- 10 minutes), it only takes 4 hours to fully cure, easy to peel off, no need to clean with solvent (very convenient for repairability, of course, we hope that the customer's products are best not to be repaired), tensile strength can reach 4MPa. This product can be widely used. Good insulation properties in the temperature and humidity range. The glue has good bonding properties and mechanical properties, and can play the role of absorption and vibration damping and barrier pollution. Mainly used for insulation, moisture and protection of LCM modules (COG, COF, TAB, TCP), and can also be used for protection enhancement of various devices and integrated circuit boards.
typical application:
• Typical application for encapsulation protection of LCM liquid crystal display modules (COG, COF, TAB, TCP).
• It is applied to the transparent conductive glass and thin film ITO coating on the touch screen to provide insulation, moisture and protection.
Features:
• Low ion content
• Low water vapor permeability
• Fast curing at room temperature
• Non-corrosive, moisture resistant
• The combination is not good for peeling off
• Can be repaired, peeling is easy, complete, no residue, no impact on the bottom layer
Note: This product should be tightly sealed after use to prevent evaporation and solidification.
Price concessions, higher performance, welcome to wholesale!
