0 Piece,Product Price: US $ 0
Quantity(Set/Sets) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Description:
Intended For: The device is intended for use as an amateur radio equipment,
including amplifiers or transceivers, or as a standalone device,performing the function of
matching the output impedance of the power amplifiers (PA) with antenna feeders.
Usage Suggestion In Two Scenarios: how an optional module in the transceiver or amplifier,
or as a standalone unit device in a separate housing, with or without indication.
There is no need for this something to remake.
The control connector can be connected as a button for manual operation start-up and output of
the control signal from the transceiver control processor or amplifier.
DIY Kit: Need to have welding ability, no need to burn-firmware
Soldered Components: All SMD electronic components soldered, chip soldered
Specification:
Type: Automatic Antenna Tuner DIY Kit
Material: metal
Package size(l*w*h): about 145x85x35mm/5.71x3.35x1.38inch
Frequency: 1.8-50 MHz
power supply voltage range: 10-15 V DC
Maximum current consumption: 300 mA
Maximum operating power: 100 watts
Maximum power measured: 150 watts
1 watt: it is necessary to set the minimum power
Minimum possible power measured: 0,1 watt
Measure steps with power up to 10W: 0,1 watt
When strong measurement steps STI above 10 watts: 1 watt
Power measurement accuracy: 10%
Maximum inductance specified: 8,4 uH capacity
Minimum inductance mounting step: 0.05μH
Maximum installed capacity: 1870 pF capacitor
Minimum installation step size: 10 pF
Package:
1set x Automatic Antenna Tuner
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-2 cm differences due to manual measurement.