USB-QC30R2 + is available through the USB interface to serial connection and RS232 signal conversion optocoupler programming cable, under the control of the driver running on the computer, the computer's USB interface simulation into traditional serial ports (known as COM interface) to use now Some variety of programming software, communications software and monitoring software and other applications. Working power cable from the USB port and by the DC / DC isolated power supply, no longer on the converter box (TX- sent; PWR- power; RX- accepted) PLC port powered by the transceiver status LED indicates data.
Isolated USB-QC30R2 + Programming Cable for Mitsubishi Q series PLC (Q mode).
Connector: USB + round 6-pin
Features and Specifications:
Support USB-QC30R2 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8
Support USB-QC30R2 + Isolated programming software version: GX Works2 or GX Developer V7.0 and above
Fully compatible with 1.1 or USB 2.0
USB bus powered, with current consumption 70mA
Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation
Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity
Cable length: 3 m
Instructions:
After the driver installation is complete, USB-QC30R2 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.