Shipment From Russia Warehouse
ARINST SSA-TG R2s is different from ARINST SSA-TG R2:
-
no way to control the device via Bluetooth
-
no way to transmit data via Bluetooth
-
no software to control the device using devices based on Android and Windows
-
the output power level of the tracking generator is not standardized
-
has a vertically oriented screen
Arinst SSA-TG R2s is an easy portable panoramic spectrum analyzer (RF multimeter) designed to display signal spectrums in the frequency range from 35 MHz to 6200 MHz.
The device is designed to determine the amplitude and frequency of the spectral components included in the signal.
The device displays the spectrums of signals of all modern technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
The signal is displayed on the device’s screen in the form of a spectrum graph, a spectrogram, a trace, and a diagram with «digital phosphor» technology.
The presence of a built-in signal generator, allows you to measure the magnitude-frequency characteristics of active / passive devices (amplifiers, repeaters, filters) and measure reflections / standing wave ratio (SWR). The software allows measuring SWR and return loss module. This requires an external directional coupler and a set of calibration measures.
You can download the instructions here www.arinst.net/files/Spectrum-Analyzer-Arinst-SSA-TG-R2s-ENG.pdf
Application
Arinst SSA-TG R2s is primarily intended for field operation. The device is rugged and light with low energy consumption. It enables service centers and maintenance teams to perform on-the-spot HF analysis for commissioning and repair works. Moreover, the spectrum analyzer is a perfect solution for repair workshops and radio amateurs.
For example, using the device you can perform the following operations:
-
put an external antenna on the base station
-
to conduct a rapid analysis of RF environments
-
check the correct operation of the repeater cellular
-
repair and adjustment of the repeater, generator, filter, etc.
-
measure SWR when using an external directional coupler
Principle of operation
The spectrum analyzer is a portable device that is connected to the measured circuit and has an independent power supply. The device has a 3.2" color resistive touch screen to display the signal spectrum and to control the device.
The device is controlled by buttons and touchscreen on the device.
Advantages:
-
low price
-
3.2-inch color resistive touch screen
-
wide frequency range: 35 MHz to 6200 MHz
-
rapid scanning of the frequency range: 2.2 GHz/s
-
high measurement precision within the dynamic range
-
built-in signal generator with a frequency range from 35 to 6200 MHz
-
exceptionally easy to use in the field: the weight is as low as 400 g, dimensions are 155х81х27 mm, independent supply lasts up to 3 h of uninterrupted operation
Specifications:
-
Frequency range displayed: 35 MHz — 6200 MHz
-
Dynamic range for 35-3000 MHz band: >80 dB
-
Dynamic range for 3000-4500 MHz band: >75 dB
-
Maximum Span: 6165 MHz
-
Maximum span scan time: ˂ 2,8 s
-
BW: 200 kHz, fixed
-
Scan speed: 2.2 GHz/s
-
Scan time in 100 MHz band: < 70 ms
-
Noise floor up to 3000 MHz: < - 77 dBm
-
Noise floor 3000 - 4500 MHz: < -78 dBm
-
Noise floor 4500 - 6200 MHz: < -75 dBm
-
Wave impedance: 50 Ohm
-
The display accuracy of the signal within the dynamic range: ± 2 dB
-
Maximum input power: +10 dBm
-
Maximum input measured signal: +5 dBm
-
Maximum DC input voltage: 25V
-
The display signal: Spectrum graph / Spectrogram / Trace / Digital phosphor
-
The number of memorized user settings: 4
-
Frequency range of built-in tracking generator: 35-6200 MHz
-
Screen diagonal: 3.2”
-
Screen type: touch, resistive
-
Screen resolution: 320 × 240
-
Maximum current consumption when running on battery: 500 mA
-
Maximum current draw when running from USB: 700 mA (when charging)
-
Battery: 2500 mAh
-
Time battery life: 3 hours
-
Battery charging time: ~ 5 hours
-
Dimensions (L × W × H): 155×81×27 mm
-
Weight: 0,4 kg
Items included in the box:
-
Spectrum analyzer
-
Battery (pre-set inside the device)
-
HF adapter SMA(male)-SMA(female) to protect the HF connector from wear-and-tear (2 pcs)
-
USB – mini-USB cable to charge the device and for data transmission
Items not included in the box:
-
External attenuation network. The maximum input power, which is supplied to the device, is limited by +5 dBm. If it is necessary to measure a larger value, each user of the device has to select the necessary attenuators on one’s own.
-
Set of the super-high frequency adapters.
Limitations
The spectrum analyzer is not a measure gauge, as it does not have an approved pattern of the measuring equipment. The approval of pattern of the measuring equipment has had a negative effect on the availability and price of the device. For this reason the spectrum analyzer is officially considered a field indicator. However, the device fully meets all technical requirements. Each device is calibrated against the power and frequency.
Official site: www.arinst.net
Additional Information:
· Essentially, the device is "RF multimeter" or "RF explorer"
· The device has a manufacturer's warranty for 1 year from the date of purchase
· The device is not a professional measuring instrument and is intended for amateur radio applications.
· If necessary, we can disassemble the device so that it passes customs more easily. Only a screwdriver is needed for assembly.
