Technical Data:
Input Power: DC10V-14V
Standby Current: <5MA
RF Frequency: 433Mhz
RF working mode: superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20-100m ( open space)
Decoding mode: MCU software decoding
Remote storage: 25pcs
Support remote type: Learning code, Fixed code ,
Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
Wiring type: fixed terminal
Output Terminal : NO , NC , COM
Dimension of PCB: 35*30*18mm (L,W,H)
Wiring diagram 1:
+V : 12V + input ;
- V: 12V - input ;
NO: Output , normal open;
COM:Output , common ;
NC: Output , normal close.
Specifications Of The Remote Control:
Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 2 buttons
Size: 59mm x 28mm x 8mm;
Operating voltage: 3V ;
Encoding type: Learning.
Transfers distance: 80m
otice:
NDifferent options include different packages:
Package 1 Included:
Only 1 EV1527 Learning code Remote Control * 1pcs ;
Package 2 Included
Only 1 receiver Receiver module (SMG-801 ) *1pcs ( include Shell );
Package 3 Included
1 Pcs * Receiver module (SMG-801) ( include Shell )
1 Pcs * Remote Control (SMG-004) (include battery )
Package 4 Included
1 Pcs * BOX (Shell )
433MHz Receiver Product Pictures:
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Method 1：
Push the learning button on the receivers for 8 times , the codes will be cleaned;
Method 2：
Keeping press the Learning Button on the receiver until the LED indicator ON and then flash,until it flash for 8 times. it mean the code have been cleared successfully;
After clearing the code, all the remote control cannot work any more.
Learning the code :(Momentary)
Push the learning key on the receiver 1 time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver 2 times , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver 3 times , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver 4 times , the time dealy for 5 seconds .
Push the learning key on the receiver 5 times , the time delay for 10 seconds .
Push the learning key on the receiver 6 times , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
