TOPGNSS AN506G Built-in GNSS antenna, used in ZED-F9P/BD910/930/970/982/MB2
module with high-precision GNSS internal antenna, can be used with GNSS multi-mode multi-frequency board, can receive L1, L2 frequency at the same time. Designed with L1 and L2 double dielectric ceramic antennas. Small size, only 55*55*13.5MM
It is easy to integrate with other GNSS terminals while satisfying good GNSS reception performance.High-quality industrial-grade manufacturing, compatible with brand receivers,
The antenna can be used with a variety of satellite navigation receivers and is widely used in geodetic surveying, waterway mapping, precision agriculture and the sea.measurement and other fields can also be applied to the military field according to application conditions.
Product features：
1. Using multi feed point design to ensure the superposition of phase center and geometrical center which
could minimize the influence of measurement error to lowest range
2. High gain of the antenna element and the direction map beam width to make sure the receiving satellites
performance of low elevation mask
3. Resistance multipath effects board inside could reduce the measurement error caused by multipath
（RF output Connector） IPEX
Name: High precision GNSS internal antenna
Working voltage: 3-12V
Connector: IPEX
Cable length: 15CM
Working mode: GNSS (L1, L2)
GNSS mode: GPS, GLONASS, GALILEO, BEi Dou
Size: 55*55*13.5mm
Model: AN506G
TOPGNSS AN506G is a multi-frequency satellite navigation antenna with high gain, miniaturization (68*27mm in shape), high sensitivity, GNSS multi-system compatibility and high reliability. It has high precision antenna and built-in LNA amplification and filtering design. It can also receive GNSS L1 and L2 frequency points. The antenna can be used with a variety of satellite navigation receivers and is widely used. It is used in high precision navigation, high precision positioning, high precision timing, unmanned vehicle, unmanned aerial vehicle, RTK measurement, precision agriculture, marine survey and other fields to meet the diverse needs of users.
|
AN506G Electrical Specifications
|
|
Frequency Range(MHz)
|
GPS L1/L2
GLONASS L1/L2
BEIDOU B1/B2
|
|
Gain(dBi)
|
4.0
|
|
Antenna AR (dB)
|
≤3.0
|
|
Phase center error(mm)
|
±2
|
|
Polarization
|
Right-hand circular polarization
|
|
Port Impedance
|
50Ω
|
|
LNA Gain(dB)
|
36±2
|
|
Noise figure(dB)
|
≤1.8
|
|
VSWR
|
≤2.0
|
|
Operating voltage(V)
|
3.0V-12.0V
|
|
Operating current
|
≤45mA
|
|
Connector type
|
IPEX
|
|
Antenna size(mm)
|
55*55*13.5MM
|
|
Weight(g)
|
150
|
|
|
Operating temperature(℃)
|
-40 - +70
|
|
Storage temperature(℃)
|
-55 - +85
|
|
|
|
Topgnss AN506G GNSS antenna with ZED-F9P module receiving satellite renderings
|
Packing list: TOPGNSS AN506G 1PCS
|
