Model:BT-0010
Characteristic：
Built in two stage low noise amplifier and filter design
GPS, GLONASS, satellite signals can be received.
Specifications：
GPS active antenna IPEX
Length: 5.0cm
Central frequency: 1590mhz-3mhz / 1590MHz + 3MHz
Low noise amplifier gain (without cable): 30dB
Noise factor: < 1.5dB
V.S.W.R: < 2
DC current: 25mA maximum
Operating temperature: -40 degrees C ~ +85
Voltage: 3.0 ~ 5.0V
Size: 28 * 28 * 5.0mm
Amplification gain: 30db
Cable: RG1.13
Cable length: 5CM
Connector form; IPEX
Antenna size: 28mm*28mm*5.0mm
Operating frequency: GPS L1 1575.42MHZ,GLONASS G1 1602MHZ
Operating conditions
The antenna has the electrical characteristics given in Tables 1 in the temperature range of -40℃ to +105℃ and under the environmental conditions of +40℃ and 0-95 ﹪r.h.
This document is held by Cirocomm, cannot be reproduced without permission .
SPEC NO. SP03AB15923-0640 ISSUED DATE 2014.12.11 PUBLISHED BY
VERSION 01
PRODUCT NAME PA025CQ0010
PAGE 3/9
4-2 Storage temperature range
The storage temperature range of product is -40℃ to +105℃.
4-3 Feed pin temperature range
Maximum temperature for soldering of feed pin is +290℃ for 3 second.
Reliability tests 5-1 Low-temperature test
Expose the specimen to -40 ℃ for 400 hours and then to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions.
5-2 High-temperature test
Expose the specimen to +105 ℃ for 400 hours and then to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions.
5-3 High-temperature/high-humidity test
Subject the object to the environmental conditions of +60℃ and 90-95﹪r.h. for 96 hours, then expose to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions.
5-4 Thermal shock test
Subject the object to cyclic temperature change (-40℃, 2 hours +85 ℃ , 2
hours ) for 100 cycles, the expose to normal temperature/humidity for 24 hours or more.
5-5 Vibration test
5-5-1 Sinusoidal vibration test
Subject the object to vibrations of 5 to 200 to 5Hz swept in 10 minutes, 4.5G at maximum (2mm amplitude), in X and Y directions for two hours each and in Z direction for four hours. After this test, examine its appearance functions.
5-5-2 Vibration test in packaged condition
Subject the object, which is packaged as illustrated, to vibrations of 15 to 60 to 15Hz swept in 6 minutes, 4G at maximum (2mm amplitude at maximum), applied in X, Y and Z directions for two hours each, i.e. six hours in total. After this test, examine its appearance and functions.
5-6 Free fall test in packaged condition
Drop the object, which is packaged as illustrated, to a concrete surface from the height of 90 cm, on one comer, three edges and six faces once each, i.e. 10 times in total. After this test, examine its appearance and functions.
This document is held by Cirocomm, cannot be reproduced without permission .
SPEC NO. SP03AB15923-0640 ISSUED DATE 2014.12.11 PUBLISHED BY
VERSION 01
PRODUCT NAME PA025CQ0010
PAGE 4/9
6 Inspection
As for the examination during mass production, we place the antenna in the production fixture individually, using the network analyzer to compare its central frequency, bandwidth, and return loss with that of the golden sample.
7 Test Record
A Copy of test record filled with following contents shall be provided at time of delivery. 7-1 Quantity of delivery
7-2 Measurement of electrical characteristics
Following data at normal temperature obtained by the method described in section 17.
7-3 Temperature and humidity of test
Quantity for sampling inspection shall be n=5 for any lot. In case quantity per lot is less than 5, the whole lot shall be inspected.
8 Warranty
If any defect occurs form the product during proper use within a year after delivery, it will be repaired or replaced free of charge.
9 Other
Any question arising from this specification manual shall be solved by arrangement made by both parties.
10 Precautions for use
‧ Antenna pattern use a silver electrode.
‧ Please don’t use the corrosion gas (sulfur gas, chlorine gas) in the atmosphere. ‧ Please don’t direct solder onto the silver electrode of Antenna pattern.
