new products,
STOTON High quality SMART GNSS module GN-180(ttl)
The latest multi-GNSS platform firmware FW 3.01. FW 3.01, besides retaining the original functions of GPS, GLONASS, BeiDou, QZSS and SBAS, is now adding Galileo support, which can track 3 satellites at the same time, and can also use all SBAS and QZSS enhancement systems at the same time.
GNSS default operating mode: GPS + GLONASS dual mode
High-quality components designed to ensure that the receiver performance!
Product highlights:
1. M8030-KT GNSS CHIP AND 18*18*4mm high sensitivity GPS antenna Design
2.Using 0.5PPM KDS high precision TCXO
3. built in RTC crystal and skin capacitance faster thermal initiation
4.1-10Hz location update rate
5.Support the positioning of PPS indicator: positioning success after flashing.
6.Support Online AssistNow and Offline AssistNow and other A-GPS services
7.GPS, GLONASS SBAS (WAAS, EGNOS, MSAS, GAGAN) hybrid engine
Default output: 1HZ
(can be set 5-10HZ)
The default baud rate: 9600
(can be set 19200 4800 38400 115200)
Small volume GPS module, including connector weight: 7.2g. Size only 18*18*8.2mm
Internal integrated LNA low noise amplifier circuit design, integrated FLASH, can be easily integrated in
The handheld wearable GPS GLONASS equipment and the aeronautical UAV equipment are required for volume.
Support refresh rate: 1-10Hz settings save
Support baud rate: default 9600 (save settings: 4800-38400-57600-115200)
Product features:
UART (TTL)output protocol
GNSS multi-mode design, support GPS+GLONASS+GALILEO and GPS+ Beidou+GALILEO Positioning mode switching
Built in FLASH can be configured to save output parameters
Using 8030 chip design
5PIN pin pad
Baud rate: 9600 (default)
Location mode: GPS+GLONASS (default)
GPS+BEI DOU mode can be set
M8030-KT chipset
|
TOPGNSS GNSS Module GN-180 Performance
|
|
GNSS CHIP
|
M8030-KT
|
|
frequency
|
L1, 1575.42MHz,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS,
|
|
protocol
|
NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS,
EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode
Default:GGA,GSA,GSV,RMC Support:VTG,GLL,TXT binary and NMEA Command
|
|
Available baud rate
|
(Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps
|
|
Receiving channel
|
72
|
|
Sensitivity
|
Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm
|
|
Cold start
|
29s average
|
|
Warm start time
|
28s average
|
|
Hot start time
|
1s average
|
|
Precision
|
HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average
Velocity: 0.1 m/s
Timepulse signal: RMS 30 ns
|
|
maximum height
|
18000 Meter
|
|
Maximum speed
|
515 m/s
|
|
Maximum acceleration
|
4G
|
|
Update frequency
|
1-10Hz(default1HZ
|
|
A-GPS
|
AssistNow on-line and off-line
|
|
Working output level
|
|
output level
|
Output TTL level
|
|
Physical characteristics
|
|
PIN
|
5 pin 1.0pitch VCC 3.3-5V.GND .TX.RX.PPS.
|
|
Dimensions
|
18mm *18 mm * 8.2mm
|
|
Operating Voltage
|
3.3V-5.0VDC ±5%
|
|
weight
|
5.5g
|
|
Connector form
|
1.0 5 PIN
|
|
Cable length:
|
15 CM
|
|
Operating temperature
|
-40 to 85° C
|
|
Storage temperature
|
-40 to 85° C
|
Packing list: GNSS module 1PCS
We can provide OEM, ODM service, if you need to buy more quantity, please contact our customer service staff, thank you!
