-
Features:
- Designed for using in any vehicle audio system.
- Loud sound and clear tone quality, high sensitivity, give you a good hearing enjoyment.
- Long service life, easy to install and maintain.
- Good workmanship, light weight, portable to carry.
- Strong magnet, durable, not easy to demagnetize.
- Wool paper cone/PP rubber surround.
- 25mm transparent slik dome tweeters.
- Clear treble, Full tone, thick Bass sound result.
- High temperature resistant, anti-aging PE rubber edge.
-
Material: Rubber + Metal
-
Paper Cone:Amniotic membrane paper cone
-
Model Name: PZ-C165
-
Color: Black
-
Impedance: 4Ω
-
The High Part: 1"inch 25mm ASV
-
Frequency Range: 65Hz-20KHz
-
Sensitivity: 90dB/W
-
Low and Medium Pitch Horn Sensitivity:90dB
-
Power: 180W
-
Rated Power: 80W
-
Power Supply Voltage: 12V
-
Total Diameter(A): 165mm
-
Mounting Diameter(B): 135mm
-
Hole Diameter(C): 157mm
-
Mounting Depth(D): 58mm
-
Magnet Diameter(E): 80mm
-
Product Size: 6.5 inch
-
Attention:
- You can mounting this component system to your front door, you can directly connect "IN" with your radio and if your system with amplifier, then you can connect "IN to your amplifier.
-
Mid-Bass Mounting:
- The illustration above shows the parts and correct mounting assembly of the PZ-C165 component Mid-Bass drivers. Grill is optional, Be sure to check the available mounting depth before illustration begins. Use of the foam gasket is recommencded to ensure a proper seal between the speaker and mounting surface.
-
Tweeter Mounting:
- When flush of surface mounting tweeters, make sure desired location can accommodate the hole sizes and depth required. Mount cup using provided hardware, flush mount illustration shown on right. Mount surface cup with provided screws in tweeter mounting kit, snake speaker wires, through tweeter cup, connect tweeter to wires, and snap tweeter into cup by pushing down gently. Be careful not push on the center of the tweeter grill.
