SOCOTRAN RS-35M Professional VHF Marine Radio Float Walkie Talkie Waterproof Two-way Radio NOAA Weather Alert 5W Marine VHF Radio
100%IP67 waterproof
Compared to other marine walkie talkies, our SOCOTRAN RS-35M is a real waterproof marine radios with headphone jack waterproof cover;6 grades dust proof means it will completely prevent dust invasion;7 grades waterproof is submersible in up to 1 meter of water for up to 30 minutes;Even if it falls into the sea, it will not be easily eroded by seawater and has a good performance, ideal for various of sea activities.
The professional Marine Radio with the Marine Frequency USA/Internation/Canadian Marine Channels
The weather channel will make you know the incoming hazards
Tri-Watch of USA;International;Canadian
Dual/ri-Watch allow you freely monitor the USA;Canada and international marine channels simultaneously, and Don't worry about any sea restrictions; Automatic Backlight function illuminates your travel and performs well at night.
10 pre-programming NOAA weather scan and alert
This Radio has 10 pr-programmed weather channels. the equement can detect the weather alarm tone in selected weather channel in receive and scan mode.
Features
◆ 70 Programmable Channels
◆ Water-resistant protection: IP67(1 Meter Depth for 30 Minutes)
◆ Floats on water
◆ Squelch Sensitivity
◆ Power Save Function
◆ Monitor Key Function
◆ LCD Contrast Setting
◆ Scan Resume Timer
◆ Scan Mode
◆ Beep Tone Function
◆ Weather Alert
◆ Volume Mute Function
◆ Automatic Backlight
◆ Vibration Water Draining Function
◆ Lock Function
Never lose your radio again, the rugged floating design makes RS-35M easy to float on the water if dropped overboard.
Standard IP67 make the RS-35M stay into the 1M deep water for 30 minutes.
Water-resistant protection
The water-resistant protection of transceiver means IP67 requirements, can be 1 meter depth in water for 30 minutes. Make sure supplied battery microphone jack cover, antenna etc are used and well installed before put into water.
Floats on water
The transceiver can be floated when fell into water.
The transceiver floats in fresh or salt water even when the supplied
accessories, including battery, belt clip, antenna, are attached.
When a third-party battery pack, belt clip, antenna, etc are used, it
may sink.
Beep Tone Function
Turn the key touch beep sound ON or OFF.
Weather alert
When there are significant weather information, the U.S. NOAA broadcast stations will transmit alarm weather. When the weather alert function is turned on, walkie talkies will sound the alarm at the same time " WXALT" symbol flashes. During the scan, the current weather channel in use will be scanned.
With this function enabled, when weather channel selected
WX ALT"icon displayed in the screen.
Scan Mode
The transceiver has 2 scan types-normal and priority scan. Normal scan searches all TAG channels in the selected channel group, priority scan sequentially searches all TAG channels also channel 16.
Scan Resume Timer
The scan resume timer can be set as a pause (OFF )or timer scan(ON).
OFF: when a signal is detected, the scan pauses on the channel
until the signal disappears, and then resumes.
ON: When a signal is detected, the scan pauses on the channel
for 5sec. and then resumes.
Auto Scan Function
The auto scan function automatically starts a normal or priority scan when
no signal is received and no operation is performed for 30 seconds.
Dual/Tri-watch Function
Set the watch type to Dual-watch or Tri-watch.
Monitor Key Function
The monitor key temporarily opens the squelch. This item sets the key
action.
Pu(PUSH): The monitor function is activated by holding down
[MONI]. The squelch open while holding down the key.
Ho(Hold): The monitor function is activated by holding down
[MONI] for 1.5seconds, the squelch stays open until any key is pushed.
Automatic Backlighting
This function is convenient for night-time operation The backlight
can be selected from ON and OFF. When on, press any key except for
[PTT] to turn on backlighting.
The backlighting is automatically turned OFF after 5sec. of
inactivity.
LCD Contrast Setting
Set the LCD contrast level to high contrast or Low contrast.
The LCD contrast level has little effect during indoor use.
Power Save Function
The power save function reduces current drain by turning OFF the receiver circuit for preset intervals.
OFF: Function is turned OFF
ON: Function is turned ON and will be activated when no signal is received, and no operation is performed for 5seconds.
Squelch Sensitivity
Squelch sensitivity function is activated to enhance noise reduction,avoid noise from affecting squelch.
