-Construction: permanent magnet
-Protect function: drop dry
- Continuous current (A): or so 0.3A
- Output power: or so 4.5 W
--Use: boat, fan, home appliance, electric bike, car
- stroke: 30,50,70mm (if no noted ,we will send 70mm)
(1) Do not store or operate the unit in a high temperature or humidity environment and avoid the gas environment.
(2) The axial direction of the motor shaft and the bearing load in the radial direction should not exceed their capability.
(3) Do not strike abnormally when attaching sprockets / sprockets / pulleys to the output shaft. When the motor is fixed, the screw length should not be too long or damage the parts in the engine.
(4) About Noise: High-speed DC motors generate a little noise. If you are very concerned about noises, please contact us.
Power Supply Information:
Output Voltage DC: 12V
Voltage Output: +/-1%
Output Current Rated: 6A
Current Range Output: 0~6A
And Noise Wave: 100mVp-p
Stability Inlet: +/-0.5%
Stability Load: +/-.5%
Output Power DC: 75W
Efficiency: 78%
Range for DC Voltage Adiustable: +/-10%
Voltage Input: 100~240V 47~63HZ
Current 1.6A/115VAC: 0.8A/230VAC Input
Current Leakage: <0.5mA/240VAC
Inrush Current AC: Start Current 18A/115V 36A/230V Cold
Protection Overload: Shut off current automatically, restore 105%~150%
Voltage Protection Over: voltage 105%~150% Output
Coefficient Temperature: +/-0.03%/ degrees C (0~50 degrees C)
Setup, Rise, up time Hold: 200ms, 100ms, 30ms
Voltage Withstand: and output internal input: and enclosure 1.5KVAC: output, and enclosure Input: 0.5KVAC
Temperature and Humidity Working: -10 degrees C~+60 degrees C, 20%~90%RH
Temperature and Humidity Store: -20 degrees C~+85 degrees C, 10%~95%RH.
Speed Controller Information:
Input Voltage: DC12-24V;
Output current: 10A;
Output power: 240W;
Voltage range: 5%~100%;
PWM Frequency:18KHz;
