Features:
Intelligent charging, automatic stop when fully charged, one-button repair, winter and summer mode charging
Suitable for SUV 12V2AH-90AH Motorcycle Car SUV
Dry batery water battery lead-acid maintenance-free battery/(lithium batery)
Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..
Switchmode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over voltage protection: Yes
Over temperature protection: Yes
Cooling: Fan
Product Information:
Rechargeable battery type: lead acid battery
Input parameters: 110-265V AC, 50-60Hz
Output parameter: 13.8V
Charging current: 8A (mA)
Product size: about 17*9.8*6cm
Weight: about 560g
Product advantages:
1. Six protection: over current protection, short circuit protection, reverse connection protection, over temperature protection, over voltage protection, low voltage protection
2. Silent cooling fan: greatly extend the life of the charger with aluminum radiator
3. Anti-freeze pure copper soft core wire and full wrapped alligator clip; cold and frost resistant and universal wide voltage
4. Intelligent digital display: display data automatic carousel, can display temperature / current / voltage / power
5. Simple operation: precise control of the CPU, intelligent charging, no need of adjustment, automatic charging when the battery is plugged in
6. Red clip to fix battery positive (+) ; Black clip to fix battery negative (1)
7. Pure copper high frequency transformer: powerful power and fast charging
8. Detection voltage and power: Connect the battery without plugging in the power, it can display
the battery residual voltage. Keep track of your battery status and see if you need to charge.
9. One-button repair for activating the battery: using high and low frequency pulse repair technology, for the undervoltage battery, the battery that has been idle for a long time and the battery that is not charged, which has a good repair and activation effect.
10. Winter and summer mode, voltage sub-charge: the charger automatically detects the outdoor temperature, automatically starts the winter and summer mode； automatically selects the appropriate charging voltage according to the temperature without adjustment.
How to Use:
1. Check your battery parameters is compatible to the charger (at the back of the charger)
2. Connect the red clamp to the positive pole(+), black clamp to the negative pole(-)
3. The LCD display will show battery voltage, charge current and inside temperature (Temperature is for reference only, allowed tolerance).
4. Wrong battery connection: "El-I-" will displayed on screen, the indicating lamp will flash.
5. Connect the charger with AC power source, the charger will start to operate (the Charge-lamp will start to flash in red).
6. Once the battery is fully charged, the battery bar on screen will in FUL" Status, meanwhile, the charge indicating lamp will keeps on. Keep the charged status in 1-2 hours is highly recommended.
7. Charging completed, remove the charger.
How to Pulse Repair Battery:
1.Connect the battery with the Charger and switch on AC mains, then press "Repair" Button. the "PUL" will display on the screen, the Charge-lamp will start to flicker in red.
2.The suggested Repair time for motorcycle battery is 5 hours, For car battery is 8 hours.
3.Press "Repair" button again; the battery will automatically switch to normal charging mode.
4. Check the battery temperature while Repair, stop to Repair the battery when the battery temperature too hot.The longest repair time is 24 hours and will automatically switch into normal charging mode when reach the maximum repair time.
5. The battery will be charging even the battery is in Repair-mode, the battery will be fully charged if the repair takes long hours. One more hour charging is recommended when the battery screen shows "FUL". Double check whether or not the battery is fuly charged when charging completed.
Frequently Asked Questions:
1. The LCD display "FUL", but the battery is yet fully charged.Reason: As the Battery inside resistance is too large or the capacity of battery is reduced for Feeder Battery, vulcanized Battery, Low voltage/Long-idle time Battery.the voltage of battery will immediately soar, causing the "FUL" status occurs when the attery is yet fully chargedSolutions: Press "repair" button, activate the battery.
2. Battery voltage is normal, however the charger does not work: Reason: There is no AC power input.Solutions: Check the AC-power source are working or not, changing the socket and re try it.
3.Unable to reach "FUL" status after charging in long time.The battery has been vulcanized, or feeder, or water depletion in the battery. The battery voltage will keep low status, causing the battery unable to get fully charged.Solutions: Stop to charge when the battery is heating, check the battery is in shortage of liquid or Not. please charge cycle 1-2 times (Discharge-Charge, Discharge-Charge)
