Kitchen cabinet corner corner linkage pull basket small monster corner pull basket cabinet rack upgrade model double row track
Product specification classification:
Open the door from the right
Open the door from the left
Upgrade instructions
This basket is different from the ordinary low-cost, and the track is changed from the original bottom single to the side double (reinforced) to increase the overall load-bearing performance of the basket. Because of the basket linkage design, it has a certain resistance, so the damping track is eliminated, the failure rate is reduced, and the durability and practicability of the basket are improved.
Product features:
Can improve corner space utilization.
This is the upgraded pull basket is different from the normal model is the low configuration. The original bottom is a single track, and now the track is distributed on both sides (is reinforced). Increase the overall load bearing performance of the basket. Because the basket is a four-link design with a certain resistance, the damping track is eliminated and the failure rate is reduced. Improve basket durability and practicality.
The cabinet door is fixed, and the left and right doors can be selected. Perfectly integrated with the cabinet to better match your cabinet.
Cabinet size (must ensure that there are no obstructions inside the corner):
Corner basket installation size: internal width ≥ 860mm, height ≥ 530mm, depth ≥ 510mm, door hole ≥ 360mm
Purchase notice and precautions:
01, what are the requirements for the cabinet?
The inner width of the cabinet should be ≥860mm, the depth requirement should be ≥510mm, the inner diameter of the door hole should be ≥360mm, and the inside of the corner cannot be covered.
02, package installation?
The basket needs to be installed by the customer, and the general cabinet cabinet will be installed. We provide installation drawings, and we can install them ourselves with confidence. It is not very complicated and can be installed by ourselves.
03, will it rust?
The basket is made of solid stainless steel and the rail shelf is equipped with carbon steel paint, which will not rust after installation.
04, why not use the damping track?
Because the corner basket is a linkage design, the basket pulls itself with a certain resistance. If the damper track is used, the failure rate will increase.
Packing size: 92*55*24
The corner basket must be installed to meet the cube space indicated in the figure below.
Internal width ≥ 860mm
Door opening width ≥ 360mm
Cabinet depth ≥ 510mm
Internal height ≥ 550mm
aterial introduction:
The following is a picture of the installation accessories: